STEP 1
Download in Google play store or IOS store
LinX CGM Application
STEP 2
Choose the Insertion Area
Uper Arm
STEP 3
Sterilize:
Before the insertion, clean the insertion site with the soap water and disinfect it using alcohol wipe and let it air dry completely.
STEP 4
Apply sensor:
Hold the applicator vertically with the cover facing up. Unscrew the cover of the applicator and make sure to take out the desiccant block before inserting the sensor.
Push the applicator vertically and firmly against the insertion area, and then press the top button to insert the sensor.
STEP 5
After insertion:
Smooth down the sensor adhesive with a finger to ensure the sensor stays on the body for the entire duration of use.
Note: Use overtape if desired for additional adhesion.
Pair the sensor
Tap to connect.
Tap “Pair“ on the home screen.
Tap the correct CGM SN to connect.
If there is one more sensor SN number on the Nearby Devices list, the app needs your re-confirmation of the SN by scanning the QR code or entering the SN manually.
Warm-up time takes 1 hour.
